Ion360™ Rods

The ion360™ Rod system advances the technology of static elimination and is used by the largest converting companies such as Unilever and Alcan Packaging.  The conductive micro-fiber rich surface provide a full 360-degree field of static elimination making all sides of the rod effective regardless of the web speed or high static voltage. This eliminates the need for cleaning, calibration, and declining performance. The ion360™ ion Rod is a direct replacement for electric static bars.

If you need 24 inches or more please contact us for a price. (781) 639-9796

No Speed Limit

Ion360™ rods produce more ion current than electric bars – they perform at any web speed or high static level. No Static Limit!

No Dirt Attraction

Ion360™ rods do not attract dirt or create particles like high voltage bars. This eliminates the need for cleaning, calibration, and declining performance.

Simple Installation

Connect the Rod to ground (bare metal of the machine). Mount ion360™ Rod about 20 mm (.75”) from surface to be neutralized.

Custom Lengths

Available in custom lengths from 1″ to 140″. (Next day if necessary). 2 mounting options available. Lug mounting and Magnet mounting – See pictures below. For narrow webs (less than 24 inches long) the Ion360™ ion Rod is .25″ in diameter. The ion360™ ion Rod longer than 24 inches is .5″ or 1/2″ in diameter.

Simple Installation

The ion360™ – ion Rod system provides a minimal mass and lightweight core that attracts the static charge without the need for a power supply. Connect the ion Rod to ground (bare metal of the machine). Attached with a magnet mount shown above, for narrow webs- less than 24 inches. Mount with an aluminum lug for wider webs, 24-140 inches, shown above. Mount ion360™ – ion Rod about 1 inch (25mm) from surface to be neutralized.

Lug Specs

 • Device Type: K-4,5,7 (GRD) • Anti-Rotation Feature: No • Conductor Size: No #6-250 MCM • Stud Opening: 9/16” • Pressure Screw Head: 5/16” Allen • Dimensions* (inches) L2-9/16 W1-9/32 H1-3/16 • Connector Lugs Lug Extender • Pressure type lugs for Landis & Gyr’s stud type meter mounting devices are made of 6061-T6 aluminum to provide high strength and high conductivity. • All lugs are tin-plated to ensure low contact resistance and to reduce corrosion. • Allen or hex head pressure screws are furnished to provide excellent conductor spread for maximum binding action with the lug. • All Landis & Gyr lugs are listed with Underwriters Laboratories.